DHQP Horizontal Metal Sheet Lifting Clamp: Efficiency and Durability
The DHQP clamp, equipped with an increased opening, is designed specifically for the horizontal movement of steel sheets. Additionally, it can efficiently lift other flat steel elements, provided they are not thicker than the clamp's maximum opening. The construction of this sheet clamp is relatively simple, offering extended service life and rare instances of malfunction. The DHQP horizontal lifting clamp is crafted from alloyed steel.The primary distinction of the DHQP clamp in comparison to the DHQ is its increased opening. This particular horizontal clamp doesn't have fixators and operates on a self-gripping principle. The heavier the load, the greater the force applied to grip the sheet securely. The base of the DHQP clamp lacks rubber pads, presenting an additional advantage.
The key advantage lies in the ability to slide the clamp beneath low-lying metal sheets. These horizontal sheet lifting clamps typically operate in pairs. Often, even two pairs (4 pieces) are used together as a single lifting device. The number of clamps used is determined by the weight and dimensions of the load being lifted.
For longer sheets, it's advisable to use two pairs of clamps. Using two pairs makes it easier to center the load and prevents tilting in any direction. This clamp type doesn't have a load-bearing link. There's only a hole at the top for convenient attachment using a rigging hook. The heavier the load, the more force is exerted to secure it. The horizontal clamp isn't designed for lifting elements in a vertical plane. Otherwise, working with this type of clamp is straightforward and safe; it's essential to monitor the condition of the teeth in the upper part of the opening.
Application of DHQP Horizontal Clamp:
- For lifting metal sheets up to 60mm thick.
- For lifting other elements compatible with the clamp's usage guidelines.
Advantages of DHQP Horizontal Sheet Clamps with an Increased Opening:
- Manufactured using exceptionally durable materials.
- Capability to handle sheets over 40mm.
- Completely flat base for maximum contact.
- Self-gripping mechanism.
- Safety features to prevent injuries (no sharp edges or burrs).
- Designed to work in pairs for optimal performance and safety.
| Робоче навантаження, тн (одного захвату) |
Зів Amax, мм |
B, мм |
C, мм |
Dmax, мм |
E, мм |
Маса, кг |
| 0.75 |
0-50 |
127.00 |
100.00 |
218.00 |
30.00 |
2.20 |
| 1.50 |
0-50 |
230.00 |
100.00 |
270.00 |
34.00 |
4.30 |
| 2.50 |
0-50 |
240.00 |
110.00 |
315.00 |
40.00 |
6.00 |
| 5.00 |
0-60 |
260.00 |
130.00 |
540.00 |
40.00 |
14.00 |