Chain slings

Four-legged chain sling 4SC is four chain legs with hooks fixed to the load-bearing oval link. The sling is assembled from components of strength class 8 (G80). At the customer's request, other lifting elements may replace standard fork hooks: different types of hooks, chains, rigging shackles, cargo grips. If fittings are replaced, the cost of the 4SCC sling will be recalculated from the original. The price of the 4SCC sling is higher than similar rope or synthetic tape slings, but justified as the durability of chain slings far exceeds that of wire or synthetic textile ones. Four-legged chain slings can be made with sliding choker hooks to use the 4SCC sling legs as a choker. In this case, the safety factor of the chain sling will remain unchanged. Using a four-legged chain sling with limb-limiting (shortening) hooks is very practical and convenient: it needs to be purchased only once, while adjusting the limb size within the entire spider length range. This hook allows changing the length of the chain sling towards reduction from the original. APPLICATION OF 4SCC CHAIN SLINGS: Industrial equipment: Chain slings are often used for lifting and moving heavy equipment on production sites, including in metallurgy, engineering, and other industries. Construction: In construction, chain slings are used to lift and move construction materials, beams, concrete blocks, and other heavy elements. Marine and port operations: They are widely used for loading and unloading operations in ports, lifting cargo on ships, and servicing marine vessels. Transportation: Chain slings are used to secure cargo on transport vehicles such as trucks, trailers, and railway wagons. Energy: In the energy industry, chain slings are used for installing and servicing equipment at power plants, wind farms, and other energy facilities. G80 CHAIN SLINGS OFFER THE FOLLOWING ADVANTAGES TO CONSUMERS: Strength and reliability: Chains used for slings have high strength, allowing them to lift and move heavy loads without the risk of breakage or deformation. Resistance to various conditions: Chain slings are usually resistant to various environmental conditions such as high temperatures, chemicals, and wear, making them applicable in different environments. Durability: Proper care of chain slings can significantly extend their service life. They are usually less prone to wear and damage than other types of slings. Flexibility and versatility of use: Chain slings can be used for a wide range of cargoes and lifting tasks, making them a versatile choice in various fields, from construction to industrial operations. Ease of maintenance: With proper maintenance and checks, chain slings can be easily maintained in working condition. Regular checks for wear and damage help ensure safety when working with them...

1SL Single-Leg Chain Sling — Strength and Safety for Industrial Lifting Purpose and Use Cases The 1SL single-leg chain sling is designed for lifting and handling loads in demanding environments. It is widely used in heavy industry, construction sites, metalworking facilities, warehouses, and shipping terminals. High Performance and Temperature Resistance Manufactured with G80-grade lifting chains in accordance with EN 818-4:2017, the sling operates reliably in temperatures from -40 °C to +400 °C. Its 4:1 safety factor provides durability and peace of mind under constant heavy loads. Design Advantages The single-leg configuration is ideal for lifting in narrow spaces or when handling loads with a shifted center of gravity. The sling can be equipped with various hooks (clevis, eye, self-locking), links (omega, pear-shaped, transition), and length regulators for flexibility in use. Durability and Maintenance The chain sling resists stretching, impact, heat, corrosion, and contact with sharp edges. Damaged components can be replaced, extending the service life of the product and reducing downtime. Limitations and Recommendations Not suitable for lifting fragile or highly sensitive loads. Should not be used under sudden shock loads. Regular inspection of chain wear is necessary to maintain safe operation...

Universal chain sling two-branch 2SC Description and features: The two-leg chain sling 2SC is carefully manufactured from chains of the 8th strength class using connecting links. Ideal for easy attachment to a crane hook and can be supplied with a variety of different shapes and sizes, including different types of hooks. When choosing a sling, it is important to consider the maximum working load and lifting method. Different loads require specific structural elements, such as specific types and sizes of hooks and links. Made from steel chains, these lifting devices can withstand harsh environments. Repairability is an important feature - if you find wear or defects, you can easily replace elements to ensure safe operation. These slings easily move loads with sharp elements without additional protective equipment. Their flexibility allows you to use various strapping methods with minimal labor costs. Execution options: By default, the sling is assembled with a fork hook SL-12 and a link A343 (SL-33), however, it is possible to complete it with a variety of components: Self-locking hooks (SL-82, SL-81), Shortening hooks (SL-86), Hooks with extended jaw (SL-116). Scope of application of 2SC slings: Metallurgical plants and high temperature industries Construction Loading and unloading operations Rigging work in sea and river ports Chain slings G80: Our G80 chain slings have the following advantages: Compact and flexible Possibility of repair Long service life Work at high temperatures (up to 400˚C) No deformation throughout the entire service life..

Advantages of Using Chain Slings VC Reliability and Strength: Chain slings VC stand out for their high durability and reliability in operation, owing to their construction from thermally treated alloy steel with a strength rating of class 8. They are capable of safely moving and lifting heavy-weight structures. Versatile Application: VC slings are versatile equipment that is efficiently utilized for various rigging tasks with different configurations. They boast a wide range of working temperatures (from -40°C to +400°C in any humidity) and high resistance to corrosion, ultraviolet rays, and other aggressive factors. Chain slings VC represent reliable and versatile equipment suitable for a wide array of tasks across different industrial sectors, transportation, and construction...

The chain sling with two closed branches (СЦ2ВЗ) is a construction that combines two identical chain branches using connecting links (butterflies). The branches are secured on a common oval link (ОВ), which is suspended on the hook of a lifting mechanism. This type of sling is used when the load lacks specific points for hook attachment, for example, when lifting steel pipes or wooden logs. Applications of the СЦ2ВЗ slings include: Industrial enterprises, including high-temperature production Construction Cargo transportation and warehouse operations Work involving cable techniques in marine and river ports Timber harvesting Advantages of the СЦ2ВЗ slings: Compactness Possibility of repair Durability Resistance to high temperatures Resistance to mechanical damage Adjustment of branch lengths (if desired) Characteristics - SC2vz sling - 2-branch chain sling internally closed Марка стропа Діаметр ланцюга, мм Довжина L, м СЦ2вз-2,36 6 от 0,5 СЦ2вз-4,25 8 от 0,5 СЦ2вз-6,7 10 от 0,5 СЦ2вз-11,2 13 от 0,5 СЦ2вз-17,0 16 от 1,0 СЦ2вз-26,5 20 от 1,0 СЦ2вз-31,5 22 от 1,0 СЦ2вз-45,0 26 от 1,0 СЦ2вз-67,0 32 от 1,0  ..

Advantages of Using Chain Slings VC Reliability and Strength: Chain slings VC stand out for their high durability and reliability in operation, owing to their construction from thermally treated alloy steel with a strength rating of class 8. They are capable of safely moving and lifting heavy-weight structures. Versatile Application: VC slings are versatile equipment that is efficiently utilized for various rigging tasks with different configurations. They boast a wide range of working temperatures (from -40°C to +400°C in any humidity) and high resistance to corrosion, ultraviolet rays, and other aggressive factors. Chain slings VC represent reliable and versatile equipment suitable for a wide array of tasks across different industrial sectors, transportation, and construction...

USC Endless Chain Sling The USC Endless Chain Sling is a versatile lifting sling designed for lifting, securing, and transporting heavy loads during industrial, construction, rigging, and material handling operations. Its endless chain configuration provides exceptional flexibility, allowing the sling to be used in various hitching methods to safely handle loads of different shapes and dimensions. The sling is manufactured from Grade 80 (G80) lifting chain and matching Grade 80 components, ensuring outstanding strength, durability, and resistance to heavy mechanical loads. The alloy steel chain offers excellent resistance to abrasion, impact, and sharp edges, making it suitable for demanding working environments. The USC sling is especially effective for handling loads that do not have lifting lugs, eye bolts, or dedicated attachment points. It is commonly used for lifting steel sections, pipes, machinery, heavy equipment, structural components, timber, containers, and other oversized loads. A major advantage of the endless chain sling is its wide operating temperature range of -40°C to +400°C, allowing safe operation in extremely cold environments as well as in high-temperature industrial applications such as steel mills and manufacturing plants. The modular construction allows damaged components to be replaced when necessary, extending the service life of the sling and reducing maintenance costs. The product complies with DSTU EN 818-4:2017, features a 4:1 safety factor, and is supplied with a 6-month warranty. Advantages endless chain design; manufactured from Grade 80 lifting chain; Grade 80 components; excellent resistance to wear and impact; suitable for loads with sharp edges; operating temperature from -40°C to +400°C; repairable construction; long service life; compliant with DSTU EN 818-4:2017; 6-month warranty. Applications Suitable for: lifting heavy machinery; handling steel products; transporting pipes and beams; construction lifting operations; industrial equipment handling; loading and unloading; metallurgy; engineering; warehouses and logistics; marine and rail transportation. Safe Use Inspect the chain and all fittings before every use. Never use the sling if links are cracked, deformed, or excessively worn. Always lift loads smoothly without shock loading and never exceed the rated working load limit. Specifications Type: Endless chain sling (USC) Material: Grade 80 lifting chain with Grade 80 components Safety factor: 4:1 Operating temperature: -40°C to +400°C Standard: DSTU EN 818-4:2017 Warranty: 6 months..

1SLSP Single-Leg Chain Sling with Sliding Hook The 1SLSP Single-Leg Chain Sling with Sliding Hook is a professional lifting sling designed for lifting, transporting, and securing loads in construction, industrial, manufacturing, and rigging applications. Its sliding hook allows quick adjustment of the lifting point, making it easier to handle loads of different shapes and sizes while improving lifting flexibility. The sling is manufactured using Grade 80 (G80) lifting chain and matching Grade 80 components. The high-strength alloy steel construction provides excellent resistance to heavy mechanical loads, abrasion, impact, and sharp edges, making it suitable for demanding working environments. Single-leg chain slings are widely used in construction, steel production, engineering, manufacturing plants, warehouses, logistics centres, ports, and other industrial facilities. They are particularly suitable for harsh environments, elevated temperatures, and loads with an uneven centre of gravity. The sling operates safely within a temperature range of -40°C to +400°C, maintaining its mechanical properties in both cold outdoor conditions and high-temperature industrial environments. Its repairable design allows worn components to be replaced, extending service life and reducing maintenance costs. The product complies with DSTU EN 818-4:2017, features a 4:1 safety factor, and is supplied with a 6-month warranty. Advantages sliding hook for flexible load positioning; Grade 80 lifting chain; Grade 80 fittings; high strength and durability; resistant to abrasion and sharp edges; operating temperature from -40°C to +400°C; repairable construction; long service life; compliant with DSTU EN 818-4:2017; 6-month warranty. Applications Suitable for: lifting industrial machinery; transporting steel products; handling pipes and structural components; construction and installation work; loading and unloading operations; manufacturing facilities; warehouses and logistics centres; heavy-duty industrial lifting. Safe Use Inspect the chain, sliding hook, and connecting components before every use. Do not use the sling if any component is cracked, deformed, or excessively worn. Avoid shock loading and never exceed the rated working load limit. Specifications Type: Single-leg chain sling with sliding hook (1SLSP) Material: Grade 80 lifting chain with Grade 80 fittings Safety factor: 4:1 Operating temperature: -40°C to +400°C Standard: DSTU EN 818-4:2017 Warranty: 6 months Lifting capacity, t Chain identification 0,89 6х18 1,6 8х24 2,5 10х30 4,2 13х39 6,3 16х48 10,0 20х60..

 Chain Sling with Choker Hook: Maximum Efficiency in Lifting The 2SCVP sling is a branch with hooks on one end and a link on the other. The special feature of this sling is the use of choker hooks instead of conventional fork hooks, which allows for the most efficient gripping of loads on a "noose" without damaging the sling. It is made from G80 class components, ensuring durability and reliability. The cost of this sling is higher than rope analogues, but is justified by its versatility and the ability to operate in a variety of conditions.  Applications of 2SC Slings with Choker Hooks: Metallurgical plants with high-temperature operations Construction sites Loading and unloading of timber and logs Rigging operations in ports  Advantages of Chain Slings: Flexibility and compactness Repairability Longevity and reliability Operation in high temperatures up to 400°C Resistance to damage on sharp edges of loads Adjustment of branch length using shortening hooks Despite the advantages, chain slings have certain peculiarities:  Greater weight compared to counterparts  Higher cost compared to cable or textile slings   Sling designation Lifting capacity, t Chain identification 2СЦВП 1,28 1,28 6х18 2СЦВП 2,24 2,24 8х24 2СЦВП 3,40 3,40 10х30 2СЦВП 6,00 6,00 13х39 2СЦВП 8,99 8,99 16х48 2СЦВП 13,60 13,60 20х60  ..

Three-Branch Chain Sling (3SC) This sling consists of three chain branches with hooks fitted onto a load-bearing link. In terms of load capacity, it fully replicates the 4SC sling, except for the absence of a fourth branch. The sling is assembled using G80 components. Upon the customer's request, other lifting elements such as different types of hooks, links, rigging shackles, or load grips can be installed instead of standard fork hooks. APPLICATION OF 3SC SLINGS: Metallurgical and other plants with high-temperature workshops Construction Loading and unloading operations Rigging work in maritime and river ports G80 CHAIN SLINGS HAVE THE FOLLOWING ADVANTAGES: Compact and flexible Repair-friendly Long-term durability Operate at high temperatures (up to 400˚C) Remain undistorted throughout their service life Resistant to sharp surfaces (edges) of loads Ability to adjust the length of branches using shortening hooks. Characteristics - Sling three-prong chain 3С, class 8 Марка стропа Діаметр ланцюга, мм Довжина, L м 8-ЗСЦ-2,36 6 від 0,5 8-ЗСЦ-3,15 8 8-ЗСЦ-4,25 8 8-ЗСЦ-6,7 10 8-ЗСЦ-10,0 13 8-ЗСЦ-15,0 16 від 1,0 8-ЗСЦ-26,5 20 8-ЗСЦ-31,5 22 від 1,5 8-ЗСЦ-45,0 26 8-ЗСЦ-67,0 32  ..

1SL G100 chain sling — single leg sling for intensive lifting operations The 1SL G100 chain sling is made of grade 100 lifting chain and components. It provides higher working load capacity with lower weight compared to G80 slings and is suitable for both daily and demanding industrial use. Complies with EN 818-4, safety factor 4:1, and undergoes magnetic particle inspection. Operating temperature range: -40 °C to +400 °C. Warranty — 6 months. Design and configuration of the 1SL G100 sling Includes: master link for crane hook connection; G100 chain leg; lifting hook; optional shortening clutch. The shortening device allows quick chain length adjustment. Advantages when handling complex loads Suitable for sharp edges, irregular shapes, and off-center gravity loads. Resistant to dust, moisture, and heat. Wear is easy to detect visually. Components can be replaced. Applications Metallurgy and high-temperature production Construction and installation Ports and crane logistics Warehousing and municipal handling Operating features Heavier than textile slings. Not recommended for dynamic shock loads. Requires regular inspection.   Lifting capacity, t Chain identification 1.40 6х18 2.50 8х24 4.00 10х30 6.70 13х39 10.00 16х48 19.00 22х66 26.50 26х96..

2SL G100 chain sling — two leg lifting sling for heavy industrial loads The 2SL G100 chain sling is made of grade 100 lifting chain and components. It offers 25% higher strength than G80 with lower weight, suitable for intensive and complex lifting tasks. Complies with EN 818-4, safety factor 4:1, and undergoes magnetic particle inspection. Operating range: -40 °C to +400 °C. Warranty — 6 months. Design with hooks and shortening clutches Includes: master link; two G100 chain legs; hooks on each leg; optional shortening clutches. Allows quick length adjustment without loss of WLL. Advantages with irregular and heavy loads Two-leg configuration stabilizes loads with off-center gravity and sharp edges. Resistant to moisture, dust, and heat. Repairable by replacing components. Applications Construction and installation Warehousing and logistics Port handling operations Metallurgy and high-temperature workshops Operating features Keeps 100% WLL at -40…+200 °C. Heavier than textile slings. Requires regular inspection. Marking explanation 2SL G100 — two leg chain sling made of grade 100 components. WLL in tons, length in millimeters.   Lifting capacity, t    Chain identification 0°< β<45° 45°< β<60° 2.00 1.40 6х18 3.55 2.50 8х24 5.60 4.00 10х30 9.50 6.70 13х39 14.00 10.00 16х48 26.50 19.00 22х66 37.50 26.50 26х96..

4SL G100 chain sling — four leg chain sling (spider type) The 4SL G100 chain sling is a four leg lifting sling made of grade 100 chain and components. It provides 25% higher strength than G80 while maintaining lower weight and high load capacity. Complies with EN 818-4, safety factor 4:1, and is tested by magnetic particle inspection. Operating temperature range: -40 °C to +400 °C. Warranty — 6 months. Design and configuration Includes: master link; four G100 chain legs; safety hooks; optional shortening clutches. Industrial applications of 4SL G100 chain slings Metallurgy and hot workshops Construction and installation sites Seaports and river ports Warehousing and logistics Oil and heavy industry Advantages of four leg G100 chain slings Maintains 100% WLL at -40…+200 °C. Resistant to mechanical damage and harsh environments. Ideal for large, heavy and off-center loads. Repairable and adjustable length. Operating limitations Heavier than textile slings. Not suitable for shock loading. Requires regular inspection.   Lifting capacity, t   Chain identification 0°< β<45° 45°< β<60° 3,0 2,12 6х18 5,3 3,75 8х24 8,0 6,0 10х30 14,0 10,0 13х39 21,2 15,0 16х48 40,0 28,0 22х66 56,0 40,0 26х96..

VL G100 hook-to-hook chain leg — Grade 100 ready-to-use component The VL G100 hook-to-hook chain leg is a ready-to-use lifting component equipped with hooks on both ends for fast and safe rigging. Made of Grade 100 chain and fittings, it is 25% stronger than G80 while lighter. MPI tested, compliant with EN 818-4, safety factor 4:1, operating range −40…+400 °C with full WLL retained between −40…+200 °C. Application Used with cranes, hoists and winches in construction, ports, metallurgy, warehouses and industrial sites. Advantages ready for immediate use resistant to heat, moisture and mechanical impact suitable for loads with sharp edges or shifted center of gravity durable and repairable Notes Heavier than textile slings and may mark delicate surfaces. Avoid sharp dynamic loads. Designation VL G100 hook-to-hook — Grade 100 chain leg with hooks on both ends.   Lifting capacity, t Chain identification 1.40 6х18 2.50 8х24 4.00 10х30 6.70 13х39 10.00 16х48 19.00 22х66 26.50 26х96..

VL G100 chain leg link-to-link — Grade 100 chain component The VL G100 link-to-link configuration is a universal chain leg without hooks, used as a component in assembled chain slings or as a standalone lifting element. Manufactured from Grade 100 lifting chain and fittings, it is 25% stronger than G80 while being lighter. Each leg is MPI tested, compliant with EN 818-4, and designed with a 4:1 safety factor. Operating temperature range is −40 °C to +400 °C, with full WLL retained between −40…+200 °C. Industrial application The link-to-link design allows flexible sling assembly and integration with cranes, hoists, winches and lifting systems. Widely used in construction, ports, metallurgy, warehouses and logistics. Advantages higher strength with reduced weight vs G80 resistant to moisture, heat and mechanical impact compact storage and transport custom sling configuration options long service life and repairability Operational features Heavier than textile or wire rope slings. May mark delicate surfaces. Not suitable for sharp dynamic loads. Regular inspection is required. Designation VL G100 link-to-link — hookless Grade 100 chain leg. WLL in tons, length in millimeters.   Lifting capacity, t Chain identification 1.40 6х18 2.50 8х24 4.00 10х30 6.70 13х39 10.00 16х48 19.00 22х66 26.50 26х96..

SL2VZ G100 — endless two leg chain sling for basket and choker hitch without lifting points The SL2VZ G100 is a two leg endless chain sling designed for loads without dedicated lifting points such as lugs, eyes, or rings. Its endless configuration allows the load to be wrapped and lifted in a basket or choker hitch quickly and safely. The sling is manufactured from grade 100 chain and components in compliance with EN 818-4. Compared to G80, it is 25% stronger while being lighter, maintaining high working load limits. Safety factor — 4:1. All components undergo magnetic particle inspection (MPI). Operating temperature: -40…+400 °C 100% WLL retention: -40…+200 °C Warranty: 6 months Typical use cases for SL2VZ G100 This sling is selected when it is necessary to: lift loads without attachment points; handle long, round, or oversized items; work with loads having an off-center gravity; perform fast rigging in intensive operations; lift items with sharp edges. Common loads include: logs and timber large diameter pipes, channels, profiles steel structures, beams, billets oversized irregular objects Endless two leg construction The sling consists of: a master oval link; two endless G100 chain legs; butterfly-type connecting links. This design ensures even load distribution and secure grip without hooks. Operational advantages of SL2VZ G100 Higher strength with reduced weight vs G80 Excellent resistance to sharp edges and mechanical damage Suitable for hot workshops and aggressive environments Compact and easy to store Repairable with long service life Reliable for unstable and asymmetrical loads Application fields Metallurgy and hot production areas Forestry and wood processing Construction and installation works Ports, warehouses, logistics hubs Limitations and inspection requirements Heavier than textile or wire rope slings Not suitable for shock or dynamic loading May mark painted or fragile surfaces Requires regular professional inspection as wear is hard to detect visually Marking explanation SL2VZ G100 — two leg endless chain sling made of grade 100 components. Lifting capacity, t   Chain identification 0°< β<45° 45°< β<60° 3,0 2,12 6х18 5,3 3,75 8х24 8,0 6,0 10х30 14,0 10,0 13х39 21,2 15,0 16х48 40,0 28,0 22х66 56,0 40,0 26х96..

USL G100 — universal endless Grade 100 chain sling for heavy-duty lifting The USL G100 is an endless (closed-loop) chain sling manufactured from Grade 100 lifting chain and fittings. Compared to G80, it is 25% stronger while lighter, making it ideal for handling heavy, oversized loads, loads with sharp edges, and loads with an off-center center of gravity. The sling complies with EN 818-4, is MPI (magnetic particle) tested, has a safety factor of 4:1, and is designed to operate in temperatures from −40 °C to +400 °C. Within the range −40…+200 °C, the sling retains 100% of its rated Working Load Limit (WLL). Depending on chain diameter, the capacity may reach up to 42 tons. Why the endless (ring) design matters The endless configuration allows multiple hitch methods without additional legs or connectors: choker hitch basket hitch wrap-around hitch multi-point load contact handling loads with shifted center of gravity The chain ends are joined by a Grade 100 connecting link (“butterfly link”), ensuring even load distribution across the sling. Typical applications of USL G100 chain sling This sling is used where textile or wire rope slings wear out quickly or cannot withstand the environment: metallurgy and high-temperature workshops marine and river ports, rigging operations construction and installation sites warehouses, logistics, and industrial facilities outdoor, wet, and aggressive environments It performs reliably in contact with sharp steel edges, concrete products, heavy equipment, and structures. Advantages of the USL G100 endless chain sling Higher strength Grade 100 Lift the same loads as G80 with less sling weight, or lift heavier loads with the same chain size. Versatile hitch configurations One sling replaces several multi-leg sling options. High-temperature resistance Safe operation up to +400 °C. Wear, impact, and deformation resistance Chain links resist abrasion and mechanical damage. Long service life and repairability Individual components can be replaced instead of discarding the whole sling. Flexible and compact for storage Easy to fold and transport. Operational notes and limitations heavier than textile and wire rope slings may mark painted or delicate surfaces not intended for sharp dynamic (shock) loading requires regular visual inspection of links For fragile loads or finished surfaces, soft slings are recommended. Designation explanation USL G100 — universal endless chain sling made from Grade 100 components. WLL is specified in tons, length in millimeters. Lifting capacity, t Chain identification 2.24 6х18 4.00 8х24 6.40 10х30 ..